Feel free to attach and detach the RIVER 600 Extra Battery to meet your needs now and later.
-
General Info
| Net Weight |
11lbs (5kg) |
| Dimension |
15.7 x 8.3 x 10.6 in (40 x 21 x 27 cm) |
| Charge Temperature |
32-113°F +/- 5°F (0-45°C +/- 3°C) |
| Discharge Temperature |
-4-140°F +/- 5°F (-20-60°C +/- 3°C) |
| Color |
Cyber Black |
| Warranty |
24 months |
Charging
| Charge Method |
AC Wall Outlet, 12V Car Adaptor, Solar Panel |
| Full Recharge Time |
1.6 Hours (AC)
3 Hours (12/24V Car Adaptor)
1.6-3 Hours (Using 2x110W Solar Panels simultaneously with full sun)
|
Battery Info
| Capacity |
288Wh (28.8V) |
| Cell Chemistry |
Lithium-ion |
| Shelf Life |
1 year (after fully charged) |
| Cycle Life |
500 Cycles (80%+) |
| Management Systems |
BMS, Over Voltage Protection, Overload Protection,
Over Temperature Protection, Short Circuit Protection
Low Temperature Protection, Low Voltage Protection,
Overcurrent Protection
|
| Testing and certification |
UL CE FCC RoHS PSE |
Input Ports
| AC Charge Input Power |
X-STREAM Charge 250W max |
| AC Charge Input Voltage |
100-120Vac(50Hz/60Hz) International Version 220-240Vac(50Hz/60Hz)
|
| Solar Charge Input |
200W 10-25V DC 12A max |
| Car Charger |
12V/24V DC 10A max
|
Output Ports
| AC Output (x3) |
600W (Surge 1200W) total,120Vac( 50Hz/60Hz) |
| USB-A Output (x2) |
5V DC,2.4A,12W Max, per port |
| USB-A Fast Charge (x1) |
5V DC,9V DC,12V DC,2.4A,28W Max |
| USB-C Output (x1) |
5V DC,9V DC,12V DC,15V DC,20V DC,5A,100W Max
|
| Car Power Output (x1) |
136W, 13.6V DC, 10A Max |
| DC5521 Output (x2) |
13.6V DC, 3A Max, per port |
-
Frequently Asked Questions
How long will the battery last unused? If I were to just store it for use in an emergency what would I need to do to maximize the life of the battery?
The shelf life of RIVER 600 is up to a year, but in good storage condition. In order to maximize the life span of the battery we still recommend you discharge RIVER 600 to 30%, then charge to 85% every 3 month.
What will be the noise level of RIVER 600?
1.) When AC output is between 0-400W, the sound level is around 42 dB at 1 meter from RIVER 600, which is simialr to the sound level in the library.
2.) When AC output is between 400-600W, the sound level is around 48 dB at 1 meter from RIVER 600, which is similar to the sound level in the office.
3.) When charging RIVER 600 through X-Stream AC input, the sound level is 45 dB at 1 meter from RIVER 600, which is simialr to the sound level in the office.
4.) When charging RIVER 600 under quiet mode, the sound level is 40 dB at 1 meter from RIVER 600, which is simialr to the sound level in the library.
Could I use solar panel with RIVER 600?
Yes. You can connect 1*110W solar panel or 2 sets of 110W solar panels in parallel to get more solar power.
How to connect the APP with RIVER 600?
There are two methods to connect:
Using Wi-Fi:
a.) Long press the IOT Reset button on RIVER 600 until you hear a “beep” sound.
b.) Find the device in the Wi-Fi setting on your phone. Click the device to connect.
c.) Go back to the EcoFlow App. Click the + on the top right to start connection.
d.) Tick the “operation confirmed” and proceed to the next step.
e.) Choose the Wi-Fi and enter the password to proceed.
f.) Wait until the connection is finished.
Using Hotspot:
a.) Long press the IOT Reset button on RIVER 600 until you hear a “beep” sound.
b.) Find the device in the Wi-Fi setting on your phone. Click the device to connect.
c. Wait until the connection is finished.
If your device successfully connect with your app, it will appear on your "Devices" list.
How to connect the APP with RIVER 600 when off-grid?
Using Hotspot:
a.) Long press the IOT Reset button on RIVER 600 until you hear a “beep” sound.
b.) Find the device in the Wi-Fi setting on your phone. Click the device to connect.
c.) Wait until the connection is finished.
If your device successfully connect with your app, it will appear on your "Devices" list.
Can RIVER 600 be used in line as an UPS for uninterrupted power?
RIVER 600 supports an entry-level UPS function. But please perform multiple tests to confirm compatibility before connecting devices such as data servers and workstations with RIVER 600. EcoFlow will not be responsible for any loss of data or equipment damage caused by customers' failure in following the instructions.
How to upgrade firmware?
The firmware can be upgraded using the EcoFlow App.
a.) Make sure the RIVER 600 is plugged into AC power source or has at least 50% power and System Power is ON.
b.) Disconnect all other input or outputs from the RIVER 600.
c.) Make sure the 2.4 GHz WiFi router signal is strong.
d.) On the System Settings page, tap "Update" button
e.) Four packages will be downloaded and installed. While this happens the icons on the LCD display may flash which is normal.
f.) Close and reopen EcoFlow App and verify the new Version number appears on the Device System page.
How to control RIVER 600 remotely?
a.) Make sure your APP is connected to the device you need to use.
b.) Make sure that your device is on.
c.) Make sure the Wi-Fi your device connected to is on.
d.) Find your device in the APP then explore the functions you would like to accomplish remotely through the APP
How to turn the X-boost function on?
Click "AC" on the device page of the APP, and you could turn on the "X-Boost" function after entering the page.
*In order to save power, it is recommended to turn off the X-Boost function when you don’t need to use it.
*X-Boost technology's built-in advanced algorithms would be able to run devices with up to 1200W per draw, but it is recommended to test before use.
*X-Boost mode is NOT suitable for ALL appliances. Some 600W-1200W appliances with strict voltage requirements may not function (eg. air compressor). Please test to confirm before using the device. X-Boost mode is enabled by default. You can disable it on the APP.
Where can I find out the firmware version?
Find your devices on the “Devices” Page, go to the “System” button, then you will find the firmware version by clicking “Version” on the system page.
How to report issues or submit feedback using APP?
Open the APP, find "Help & Feedback" under the user page, and click "Feedback"
EcoFlow River 600 Contents
| River 600 |
(1x) |
| DC5521-DC5525 Cable |
(1x) |
| 1.5m MC4 to XT60 Solar Charging Cable |
(1x) |
| 1.5m AC Charging Cable |
(1x) |
| 1.5m Car Charging Cable |
(1x) |
| User Manual |
(1x) |
Extra Battery Contents
| RIVER 600 Extra Battery |
(1x) |
| Long Screws |
(4x) |
| Cross Screw Driver |
(1x) |
| User Manual |
(1x) |
User manuals
Click to Download RIVER 600 User manual
Click to Download RIVER 600 Extra Battery User manual
